Why Choose 2014 Aluminium Alloy Sheet?



Aluminium Sheet

·     2014 T6 Aluminium Sheet

T6 temper 7075 has an ultimate tensile strength of 510–540 MPa (74,000–78,000 psi) and yield strength of at least 430–480 MPa (63,000–69,000 psi). It has a failure elongation of 5–11%. Aluminium Alloy Sheet is the most widely used form of Aluminium Alloy. It is commonly used for construction, aerospace and defence applications. The T6 temper is usually achieved by homogenizing the cast 7075 at 450 °C for several hours, quenching, and then aging at 120 °C for 24 hours. This yields the peak strength of the 7075 alloy. The strength is derived mainly from finely dispersed eta and eta' precipitates both within grains and along grain boundaries. Aluminium Alloy is lightweight and has a good strength to weight ratio. 2014 T6 Aluminium Sheet can be cut using a jigsaw with the correct blade or very thin sheets can be cut using a sharp blade or tin snips. Plus Metals are the leading Aluminium Sheet Supplier in Pune.

·      2014 T651 Aluminium Sheet

2014-T651 aluminum is 2014 aluminum in the T651 temper. To achieve this temper, the metal is solution heat-treated, stress relieved, then artificially aged. The stress relief is accomplished by stretching the metal by an amount that depends on the type of standard wrought product being made (sheet, plate, bar, or forging).The graph bars on the material properties cards below compare 2014-T651 aluminum to: 2000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on. Plus Metals are one of the best Aluminium Dealer Sheet in Pune.

·      2014 T652 Aluminium Sheet 

Aluminium 2014 is an alloy of aluminium, further classified within the AA 2000 series. 2014 aluminium alloy is an aluminium-based alloy often used in the aerospace industry. 2014 T652 Aluminium Sheet can be cut using a jigsaw with the correct blade or very thin sheets can be cut using a sharp blade or tin snips. Plus Metals is the top Aluminium Sheet Exporter in Pune.

Comments

Popular posts from this blog

7075 T6 Aluminium Sheet Dealers and Suppliers in Chennai

About 7075 Aluminium Sheets Supplier in India

Different types of Aluminium Alloy Plates