Posts

Showing posts from December, 2019

ASTM B209 Aluminum Sheet

Image
ASTM B209 / 7075 aluminum is a 7000 series aluminum alloy: the prime alloying addition is zinc & it is formulated for main forming into wrought products. The properties of 7075 T6 aluminum include 17 general variations. This page shows a summary range across all of them. The graph bars on the material properties cards further compare 7075 T6 aluminum to 7000-series alloys (top), all aluminum alloys (middle), & the entire database. A full bar means this is the highest value in the relevant set. A half-full bar means it’s 50% of the highest, & so on.
About ASTM B209 Aluminum-
T6 temper 7075 has an ultimate tensile strength of 510–540 MPa (74,000–78,000 psi) & yield strength of at least 430–480 MPa (63,000–69,000 psi). It has a failure elongation of 5–11%. Aluminum Alloy Sheet is the most widely used form of Aluminum Alloy. It is commonly used for construction, aerospace & defence applications. The T6 temper is usually achieved by homogenizing the cast 7075 at 450 °C fo…

UNS A97075 | AA7075 | AL7075 | 7075 T6 Aluminum

Image
UNS A97075 / 7075 aluminum is a 7000 series aluminum alloy: the main alloying addition is zinc & it is formulated for prime forming into wrought products. The properties of 7075 T6 aluminum include 17 common variations. This page shows a summary range across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare 7075 T6 aluminum to 7000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it’s 50% of the highest, and so on.
About UNS A97075 Aluminum-
T6 temper 7075 has an ultimate tensile strength of 510–540 MPa (74,000–78,000 psi) and yield strength of at least 430–480 MPa (63,000–69,000 psi). It has a failure elongation of 5–11%. Aluminum Alloy Sheet is the most widely used form of Aluminum Alloy. It is commonly used for construction, aerospace and defence applications. The T6…

7075 T6 Aluminium Sheet Dealers and Suppliers in Chennai

Image
7075-T6 is a high strength alloy originally developed for aircraft and aerospace applications, often referred to as “aircraft grade”. The main alloy ingredients of zinc and copper make 7075 one of the highest strengths aluminium alloys available. Plus Metals are aluminium sheet dealers in Chennai. 7075 in the T6 temper is stronger than most mild steels. 7075 is considered to have good machinability, good corrosion resistance but is not good for welding. Aluminium 7075-T651 has similar characteristics to T6 but goes through an extra process to relieve some of the stresses in the material. Aluminium Alloy 7075 is available in T6 and T651 condition in sheet plate and round bar. Plus Metals is a suppliers importer stockist and dealers of 7075 T6 Aluminum Sheet in Chennai. We are 7075 T6 Aluminium Sheet Dealers in Chennai. At Plus Metals, 7075 T6 Aluminum Sheet is supplied in different cities of the country. 7075 T6 Aluminum Sheet is a high-strength aerospace aluminium products used in aeros…